80W CO2 Laser Engraving Machine Laser Tube Then press “RESET” and the

Then press “RESET” and the original settings will turn to “ 0 ”

This machine can be used in stand-alone label only

Time range:

no dry powder and no hard block

When properly applied

80W CO2 Laser Engraving Machine Laser Tube Then press “RESET” and theBrand New 80W CO2 Laser Engraving Machine Laser Tube Power output(W)80 Wavelength: 10600nm Lengthmmabout 1250 Cooling System: Water Cooling. Triggering voltage(KV)22 Operating voltage(KV)16 Operating current(mA)0 20 Outer diameter(mm)80 Power stability: 5% Water Cool Package including: 1x 80W laser tube You can't leave cooling water in laser tube after power off, it will freeze at Cold areas. Optimum working water temperature is 15 35 degrees. working